GS10 Universal Soft Starter (15A max. Heavy duty)

Description

This 120V soft starter is ideal for a variety of motors up to 15 amps, whether a table saw, grinder, router, or miter saw.
Features heavy-duty aluminum enclosure with injection molded, reinforced plastic end caps.
Software-controlled ramp sequence.
Up to 98% reduction of damaging inrush current.
Proudly built in the U.S.A..
[Patent Pending]
SPECIFICATIONS:
Voltage: 120 Volts AC
Maximum steady state current: 15A
Ambient operating temperature: 0° - 110°F
Maximum (Full Inrush Suppression) Duty Cycle: Unlimited Starts Per Hour
WARNING:
Not recommended for induction motor with high inertia load.
Will not work with air conditioners.
Do not use with a machine that already has a soft-start feature.
The theoretical ramp time of this soft starter is approximately 2 seconds.
Capacitor-start induction motors must be at full speed within 3 seconds of being switched on. If your induction motor takes longer than 3 seconds to reach full speed, discontinue use of soft starter immediately.
INSTRUCTIONS:
Indoor use only.
Insert the appropriate end of supplied power cord into the side of the soft starter.
Plug the other end of the power cord into your power receptacle.
Plug your equipment into the front outlet of the soft starter.
RAMP TIMES:
Ramp time is the duration of time required for the Soft Starter output to reach full line voltage.
GS10 ramp time: about 2 seconds.
DIMENSIONS:
Overall Length: 4.25inches
Overall Width: 3.25 inches
Overall Height: 6.3 inches
Weight: 1.8lbs.
CERTIFICATIONS:
UL/cUL Pending