Hardie plank installation tool w/added extensions for 12" siding / SOLOSIDER PRO

Description

Made in The U.S.A.      All Gauges Come In Pairs
The Solosider Pro is fully adjustable and you can do a variety of siding with this tool!
5/16 hardie fiber cement
3/8 Smartside
7/16 Smartside
5/8 James Hardie Artisan and more!
3/4" Bevel cedar
SoloSider Pro is made using Nylon-6 30% glass filled. It will
not break if you drop it from any height. It has a metal spine built in. The clamp is 410 stainless steel that is
heat treated. We use super oilite iron bushings and hardened and ground pins on the pivot points for the
clamp. The top flipper is also 410 ss ht treated. It should last a lifetime. It has a repair or replace guarantee of
2 years.
"This tool will allow clamping tension to be adjusted lightly or very heavy without allowing the tool to
pull away from the wall.  This new tool will easily handle 5/16 to 5/8 lap siding board and anything between.
Will allow a reveal of 3-3/4" to 10 3/4" recommended max in 1/6"  increments. By removing all of the spacers
you can have a 3" reveal.
The tension on the clamp is fully adjustable.
We do not recommend using over a 8" reveal but will sell you enough extra spacers to go as
high as you wish. When you close the clamp it will lightly lock in the forward position and the tension is
controlled by the tension screw not the position of the clamp.
Patent is pending.
If you are in a hurricane / tornado prone area and need a 2" or more overlap this tool will do it.