Ortur Air Assist | Air Assist's For Every Ortur Module & Model

Description

This listing covers air assists for multiple modules. When purchasing, please make sure to select your correct module/model.
SF MODEL (LU2-4-SF)
Ortur Laser Master 2 SF (Short Focus) Model Air Assist. This works with the short focus/lens model (LU2-4-SF). It attaches to the side of the module with the opening in the acrylic and is perfectly positioned without any need to tinker. Attach it and forget it. No more adjustments or aligning for your air assist. This model will not work with our Endoscope, but the following 2 will.
Tools Required:
2mm allen wrench
Install:
- Attach plate to module with provided M3 screws (on side of module that acrylic shield does not cover)
- Feed King Gubby Design's air hose through the back of the nozzle (attached to attachment plate) and run the hose up along your wire harness and zip-tie along the way.
- That's it!!
LOW PROFILE AIR ASSIST (LU1-2,
LU1-3,
LU1-4)
This is our premium and shop favorite. We love this on our in house laser and think you will love it too.
Truly a game changer in our shop. This model also works with our Endoscope attachment (https://www.ebay.com/itm/333984637131)
IF YOU HAVE A LARGE FOCUS KNOB 3RD PARTY FOR A G8 LENS IT WILL HIT, USE OUR FRAME STYLE OR INSTALL THE UNIT REVERSE.
Ortur Laser Master 2 - Air Assist.
OPTIONAL SPACER AVAILABLE FOR FIXED FOCUS MODEL 29MM (To Replace included metal cylinder)
Get deeper cuts by removing the debris with our air assist. Cleaner engravings and overall better performance. If you have shop air, we recommend between 20-25psi. Small pumps will show great improvement as well but not as good as the larger pumps. Checks the links below if you still need a pump.
Tools Required:
2mm allen wrench
Install:
-Attach joint pieces and nozzle to square frame
-Install the Joint attachment to your cooling block using the 2 supplied m3 screws (see photos)
-Install your 6mm hose (not supplied)
-Guide Hose under and up to the stepper area
-Secure hose with zip ties to the wire loom
-Place Nozzle at 45 Degrees 2-3mm from laser dot on workpiece.
BOTTOM MOUNT AIR ASSIST [LU2-4 (12V),
LU2-4 (24V)]
Simple and slim. This air assist takes up almost no real estate on your module. It conveniently attaches to the already existing threaded holes in the bottom of your Laser Master 2 Pro Model module.
This model also works with our Endoscope attachment (
https://www.ebay.com/itm/333984637131)
Ortur Laser Master 2 with the orange acrylic shields (
LU2-4 (12V) &
LU2-4 (24V
)
. This will not fit the older LM2 modules (no acrylic shield) as they do not have the holes on the bottom. If you are looking for an air assist for the regular LM2 model, please see our other listings.
OPTIONAL SPACER AVAILABLE FOR FIXED FOCUS MODEL 50MM (To Replace included metal cylinder)
Get deeper cuts by removing the debris with our air assist. Cleaner engravings and overall better performance. If you have shop air, we recommend between 20-25psi. Small pumps will show great improvement as well but not as good as the larger pumps. Checks the links below if you still need a pump.
Tools Required:
2mm allen wrench
Install:
-Fasten both attachment brackets to the module's threaded holes with the provided M3 screws
-arrange and fasten in all of your adjustable links, hose mount, and air nozzle
-Install your 6mm hose (sold separately)
-Guide hose up to the stepper area
-Secure hose with zip ties to the wire loom
-Place Nozzle at 45 Degrees 2-3mm from laser dot on workpiece.
If you need recommendations for your air pump send us a comment.
*The laser and hose shown is for illustrative purposes only and is not part of the offer.
**The laser module in the above images may differ from the pro model but is used for illustrative purposes (This product is for the Pro Model!)